Introduction

 

The 29LS1903018 Series of 19.0" TFT monitors has been primarily developed to address the growing demand from OEM's and System Integrators for a high quality monitor which can be installed within their own custom front panels

 

For ease of installation there are 8 mounting holes positioned around the edge of the 6mm thick milled Aluminium chassis Both safety glass and controls are sealed to the front chassis to protect against ingress

 

Applications

 

Designed specifically to meet the stringent demands of the marine environment in particular the Maritime Navigation and Radio Communications Equipment & Systems ( IEC 60945 ). This model is intended primarily for OEM and System Integration applications  A milled Aluminium front chassis gives exceptional stability to the construction.

 

Automatic brightness control feature aids operability in varying light conditions ...the ideal OEM solution.

Specification

 

Display: 19.0" Max. Resolution 1280 x 1024 (SXGA),  250 cd/m²  

RGB Signal Input: 15pin HD Female

Video Signal Input: PAL/NTSC/SECAM RCA + S-video

Supply Voltage: 90-265Vac  50/60Hz

Physical: 450W x 396H  x 94 mm

 

Approvals/Compliance:-

• IEC 60945 4th Edition - Pending

• ECDIS  IEC1174 - Pending

• Radar IEC 60636 - Pending

• Type Approvals - ...KME will apply to the following classification societies where demand justifies:- ABS, ClassNK, DNV & GL

Introduction

 

The 29LM19000x Series of 19.0" TFT monitors are rugged display Heads designed for desktop mounting. The compact design and a versatile mounting system optimises  both operator viewing angles and 'Lines Of Sight'. Resolutions  up to 1280 x 1024 pixels and PAL/NTSC can be displayed in superb image quality.  

 

To aid installation a VESA standard fixing is located on  the rear. Brightness is dimmable for night operation and the  power indicator (LED) luminance is controlled by a photo-diode for automatic dimming as the ambient lighting reduces. The Dimming Ratio is > 2000:1. The Monitor is manufactured in full compliance with IACS E10.

Applications

 

'Designed to Comply' with the stringent demands of the marine environment in particular the Maritime Navigation and Radio Communications Equipment & Systems (IEC 60945). The monitor offers continuity by design for all Navigational and Ship Automation applications.

Specification

 

Display: 19.0", Max. Resolution 1280 x 1024 (SXGA),  250 cd/m²  

Audio: 2 x Phono (Integral Speakers)

RGB Signal Input: 15pin H D Female

Video Signal Input: PAL/NTSC/SECAM RCA + S-video

Supply Voltage: 90-265V AC  50/60Hz

Physical: 453 (W) x 397 (H) x 84 (D) mm, 10kg

 

Approvals / Compliance:-

• "Designed to Comply" to IEC 60945 4th Edition

• Type Approvals - ...KME will apply to the following classification societies where demand justifies:  ABS, ClassNK, DNV , GL & LRS

Introduction

 

The 29LM193A55UN Series of 19.0" TFT monitors has been primarily developed for Slow Scan Legacy Systems as replacements for IBS (Integrated Bridge System) 20"/21"CRT monitors.

 

The compact profiled housing maximizes scope for installation where space is at a premium . Signal Recognition and Scaling software offer the user the ability to adjust the displayed pictured in both horizontal and vertical size allowing almost any slow scan video mode to be displayed. 

 

Brightness is dimmable for night operation by rotary control on the front panel. The power indicator (LED) luminance is controlled by a photo-diode for automatic dimming as the ambient lighting reduces. The Dimming Ratio is > 2000:1. The Monitor is" Designed to Comply" with IEC 60945.

Applications

 

This model is intended primarily for REPLACEMENT applications for either Desktop or Panel mount installation where the existing monitor operates at 15-30kHz scan rates, Analog or TTL video inputs.

 

However resolutions up to 1280 x 1024 pixels can also be displayed with superb image quality, future proofing your investment. In addition to VESA standard fixings at the rear, there is an optional mounting bracket for Desktop or Overhead installation. A milled Aluminium front panel gives exceptional stability to the construction.

Specification

 

Display: 19.0", Max. Resolution 1280 x 1024 (SXGA),  250 cd/m²  

RGB Signal Input: Analog RGB & TTL- 9-pin, 15pin HD Female & BNC

Video Signal Input: PAL/NTSC - BNC

Supply Voltage: 90-265V AC  50/60Hz  or 15-30V DC

Physical: 432(W) x 377(H) x 108(D) mm (Panel mount 84.5mm Deep)

 

Approvals / Compliance:-

• "Designed to Comply" to IEC 60945 4th Edition

• Type Approvals - ...KME will apply to the following classification societies where demand justifies:  ABS, ClassNK, DNV , GL & LRS

Introduction

 

The 29LR193A35MP ...APPROVED Series of 19.0" TFT monitors has been designed specifically to meet the stringent demands of Shock, Vibration, EMC, EMI defined in the IEC 60945 International Standard for Marine Navigation and Radio Communications Equipment & Systems. KME has ruggedised a high resolution TFT panel and a versatile analog-digital converter board to suit the 19" equipment rack format. A milled aluminium front plate gives exceptional stability to the construction. The height of the front plate is 10U (443.9mm).

 

Brightness is dimmable for night operation by rotary control on the front plate. The AC power indicator (LED) luminance is controlled by a photo-diode for automatic dimming as the ambient lighting reduces. The Dimming Ratio is > 2000:1.

 

Resolutions up to 1280 x 1024 pixels can be displayed with superb image quality. A multi-layer coated toughened glass panel gives contrast enhancement as well as protection to the TFT panel itself.  The MP version will also display PAL/NTSC signals. In addition to VESA standard fixings at the rear,  there is also an optional mounting bracket for control desk or overhead installation.

 

The Monitor is manufactured in full compliance with IACS E10.

Applications

 

Designed with ECDIS in mind and to specifically meet the stringent demands of the marine environment in particular the Maritime Navigation and Radio Communications Equipment & Systems (IEC 60945).

 

Key feature - operating parameters may also be modified using a RS232 serial data interface. There is a loop through RS232 connector allowing the data to pass through to a series of similar displays.  With each display having a unique address (set on an internal DIP switch), individual displays can be accessed from a remote controller for dynamically adjusting display parameters.

 

The monitor offers continuity by design for all Navigational and Ship Automation applications.

Specification

 

Display: 19.0", Max. Resolution 1280 x 1024 (SXGA),  250 cd/m²  

RGB Signal Input: 15pin H D Female

Video Signal Input: PAL/NTSC/SECAM RCA + S-video

Supply Voltage: 90-265V AC  50/60Hz  or 24V DC

Physical: 483(W) x 443(H) 10U High x 98.5(D) mm, 11kg

 

Approvals / Compliance:-

• Certified to IEC 60945 4th Edition

• ECDIS Compliant IEC 61174

• IACS E10

• Type Approvals - ...KME will apply to the following classification societies where demand justifies: ABS, ClassNK, DNV , GL & LRS

Introduction

 

The 29LR193A55UN Series of 19.0" TFT monitors has been primarily developed for Slow Scan Legacy Systems as replacements for IBS (Integrated Bridge System) 20"/21"CRT monitors. Signal

 

Recognition and Scaling software offer the user the ability to adjust the displayed pictured in both horizontal and vertical size allowing almost any slow scan video mode to be displayed. 

Brightness is dimmable for night operation by rotary control on the front panel.

 

The power indicator (LED) luminance is controlled by a photo-diode for automatic dimming as the ambient lighting reduces. The Dimming Ratio is > 2000:1. The Monitor is" Designed to Comply" with IEC 60945.

Applications

 

This model is intended primarily for REPLACEMENT applications for existing monitor operates at 15-30kHz scan rates, Analog or TTL video inputs. However resolutions up to 1280 x 1024 pixels can also be displayed with superb image quality, future proofing your investment.

 

In addition to 19" Rack standard fixings at the front, there is an optional mounting bracket for Desktop or Overhead installation. A milled Aluminium front panel gives exceptional stability to the construction.

Specification

 

Display: 19.0", Max. Resolution 1280 x 1024 (SXGA),  250 cd/m²  

RGB Signal Input: Analog RGB & TTL- 9-pin, 15pin HD Female & BNC

Video Signal Input: PAL/NTSC - BNC

Supply Voltage: 90-265V AC 50/60Hz  or 15-30V DC

Physical: 483(W) x 398.9(H) 9U High x 108(D) mm

 

Approvals/Compliance:-

• "Designed to Comply" to IEC 60945 4th Edition

• Type Approvals - ...KME will apply to the following classification societies where demand justifies:- ABS, ClassNK, DNV , GL & LRS

Introduction

 

The 29LM21300x ...APPROVED Series of 21.3" TFT monitors are rugged display Heads designed for desktop mounting. The compact design and a versatile mounting system optimises  both operator viewing angles and 'Lines Of Sight'. Resolutions  up to 1600 x 1200 pixels and PAL/NTSC can be displayed in superb image quality.

 

To aid installation a VESA standard fixing is located on  the rear. Brightness is dimmable for night operation and the  power indicator (LED) luminance is controlled by a photo-diode for automatic dimming as the ambient lighting reduces. The Dimming Ratio is > 2000:1. The Monitor is manufactured in full compliance with IACS E10.

Applications

 

Designed with ECDIS in mind and to specifically meet the stringent demands of the marine environment in particular the Maritime Navigation and Radio Communications Equipment & Systems (IEC 60945).

 

Key feature - operating parameters may also be modified using a RS232 serial data interface. There is a loop through RS232 connector allowing the data to pass through to a series of similar displays.  With each display having a unique address (set on an internal DIP switch), individual displays can be accessed from a remote controller for dynamically adjusting display parameters.

 

The monitor offers continuity by design for all Navigational and Ship Automation applications.

Specification

 

Display: 21.3", Max. Resolution 1600 x 1200 (UXGA),  250 cd/m²  

Audio: 2 x Phono (Integral Speakers)

RGB Signal Input: 15pin H D Female

Video Signal Input: PAL/NTSC/SECAM RCA + S-video

Supply Voltage: 90-265V AC  50/60Hz

Physical: 508(W) x 420(H) x 85(D) mm, 10.6kg

 

Approvals / Compliance:-

• Certified to IEC 60945 4th Edition

• ECDIS Compliant IEC 61174 - Pending

• IACS E10

• Type Approval ABS (American Bureau of Shipping ) - ...KME will apply to the following classification societies where demand justifies:- ClassNK, DNV , GL & LRS

Introduction

 

The 29LR213A35MP ...APPROVED Series of 21.3" TFT monitors has been designed specifically to meet the stringent demands of Shock, Vibration, EMC, EMI defined in the IEC 60945 International Standard for Marine Navigation and Radio Communications Equipment & Systems. KME has ruggedised a high resolution TFT panel and a versatile analog-digital converter board to suit the 19" equipment rack format. A milled aluminium front plate gives exceptional stability to the construction. The height of the front plate is 10U (443.9mm).

 

Brightness is dimmable for night operation by rotary control on the front plate. The AC power indicator (LED) luminance is controlled by a photo-diode for automatic dimming as the ambient lighting reduces. The Dimming Ratio is > 2000:1.

 

Resolutions up to 1600 x 1200 pixels can be displayed with superb image quality. A multi-layer coated toughened glass panel gives contrast enhancement as well as protection to the TFT panel itself.  The MP version will also display PAL/NTSC signals.

 

In addition to VESA standard fixings at the rear,  there is also an optional mounting bracket for control desk or overhead installation. The Monitor is manufactured in full compliance with IACS E10.

Applications

 

Designed with ECDIS in mind and to specifically meet the stringent demands of the marine environment in